PAROC Pro Wired Mat 100 AL1

PAROC Pro Wired mat 100 AL1
PAROC Pro Wired Mat 100 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications. At high temperatures the aluminium foil facing is of significance for insulating the radiation heat.

Datasheet

Updated 1 Mar 2015

Certification Number
0809-CPR-1016 / VTT Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN 14303-T2-ST(+)660-WS1-CL10
Nominal Density
100 kg/m³

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
width x 2000 - 6000 mm30 - 100 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability660 °C EN 14303:2009+A1:2013 (EN 14706)

Other Dimensions
Width can be 500, 600, 900 or 1000 mm depending on the supplying factory.

Packaging

Package Type
Plastic Packs on Pallet

Fire properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009 (EN 13501-1)

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100.039 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500.042 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000.047 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000.063 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 300 °C, λ3000.083 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 400 °C, λ4000.110 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 500 °C, λ5000.142 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 600 °C, λ6000.180 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT2 EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Chloride content not declared for products produced in Hällekis.

Complies with the requirements set by BS 2972 Part 12.

Durability

Durability of Reaction to Fire Against Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.
Durability of thermal resistance against high temperature
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

More Information

PAROC Pro Wired Mat 100 AL1 can be used to satisfy the requirements as given in the tables for insulation thickness in BS5422:2009. Paroc can offer help and assistance to customers to confirm that the insulation systems proposed do in fact, achieve the necessary performance criteria. PAROC Pro Wired Mat 100 AL1 conforms to BS3958-3.

Certification Number
0809-CPR-1016 / VTT Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN 14303-T2-ST(+)660-WS1-CL10
Nominal Density
100 kg/m³

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
width x 2000 - 6000 mm30 - 100 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability660 °C EN 14303:2009+A1:2013 (EN 14706)

Other Dimensions
Width can be 500, 600, 900 or 1000 mm depending on the supplying factory.

Packaging

Package Type
Plastic Packs on Pallet

Fire properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009 (EN 13501-1)

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100.039 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500.042 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000.047 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000.063 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 300 °C, λ3000.083 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 400 °C, λ4000.110 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 500 °C, λ5000.142 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 600 °C, λ6000.180 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT2 EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Chloride content not declared for products produced in Hällekis.

Complies with the requirements set by BS 2972 Part 12.

Durability

Durability of Reaction to Fire Against Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.
Durability of thermal resistance against high temperature
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

More Information

PAROC Pro Wired Mat 100 AL1 can be used to satisfy the requirements as given in the tables for insulation thickness in BS5422:2009. Paroc can offer help and assistance to customers to confirm that the insulation systems proposed do in fact, achieve the necessary performance criteria. PAROC Pro Wired Mat 100 AL1 conforms to BS3958-3.

Certification Number
0809-CPR-1016 / VTT Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN 14303-T2-ST(+)660-WS1-CL10
Nominal Density
100 kg/m³

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
width x 2000 - 6000 mm30 - 100 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability660 °C EN 14303:2009+A1:2013 (EN 14706)

Other Dimensions
Width can be 500, 600, 900 or 1000 mm depending on the supplying factory.

Packaging

Package Type
Plastic Packs on Pallet

Fire properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009 (EN 13501-1)

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100.039 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500.042 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000.047 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000.063 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 300 °C, λ3000.083 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 400 °C, λ4000.110 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 500 °C, λ5000.142 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 600 °C, λ6000.180 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT2 EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Chloride content not declared for products produced in Hällekis.

Complies with the requirements set by BS 2972 Part 12.

Durability

Durability of Reaction to Fire Against Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.
Durability of thermal resistance against high temperature
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

More Information

PAROC Pro Wired Mat 100 AL1 can be used to satisfy the requirements as given in the tables for insulation thickness in BS5422:2009. Paroc can offer help and assistance to customers to confirm that the insulation systems proposed do in fact, achieve the necessary performance criteria. PAROC Pro Wired Mat 100 AL1 conforms to BS3958-3.